10 Tips For Buying A Great Torque Wrench That Offers Durability And Performance

The Kia Sportage is a dependable, convenient four wheel drive vehicle. The Sportage is easily maneuverable and can provide hundreds of thousands of miles of use. In order to maintain your Sportage you should perform regular maintenance duties, such as replacing serpentine belts on the engine. The serpentine belt drives all of the accessories in your vehicle and is essential to proper functioning of your Sportage. Replacing the belts is an easy task that can be performed by any home mechanic.

This task requires working with larger vehicle and steel parts, it generally means that it is important to follow safety precautions. Anyone who is helping in this task must also be aware of the safety measures while installing the manifold.

Sounds of Wear Indicators – At times, the dust of brakes can be the reason behind some kind of sound or squeaking. This is a minor problem with the brake system and you can easy do without it by cleaning the dust. Using a brake cleaner spray is an easy way to do so.

When checking the coolant level make sure the engine is cooled down to prevent yourself from being burned. Use caution when removing the radiator pressure cap (if it is warm use a towel to open the cap to prevent burns). The fluid of the radiator should be full, if not top it off with a 50/50 mix of coolant and water. Some vehicles have gone to not having radiator caps and are just using a pressurized overflow bottle, if you have one of these you do not even need to take off the cap you can see the level through the bottle. Make sure you use the correct type of coolant.

Most manufacturers recommend using a Torque Wrench when tightening lug nuts. They will specify a certain ft/lb to dial in on the Best Torque Wrench Under 100. This insures the nuts are tightened properly. Over tightening can damage the studs and possibly lead to a failure in the future. Here is what happens. When the nuts are tightened, the studs will stretch. This tension holds the wheels on to the rim. If you over tighten the studs you can damage them and they could fail.

Make sure you know what is in your auto manual, and mark certain pages for reference. During auto repair visits, your mechanic will probably need to gather some information from you, about your vehicle. You may also find answers to your problems, inside.

Coat every part of the new bushing kit with lube. There is no such thing as too much lube in this type of repair job. Place the new bushing where the old bushing was removed by using the clamps. Reassemble the washers and nuts in the exact order as they were removed. Put the new suspension bushing assembly back into the ensemble exactly as it was removed. Make sure to follow the correct order when replacing the washers. Make sure that everything is together and prepared for tightening, then use the torque wrench to tighten the main bolt to the exact specs for your vehicle make or model. Reassemble everything else in the reverse order as it was removed, and the job is complete.